Tutorial: Learn to easily prepare a wool bracelet

Let’s explore how to create your braided bracelet woven with little equipment, mainly cardboard AND Laine. So, without further delays, let’s find out how to create your bracelet following this simple and detailed tutorial.

The supplies you will need

Materials

Before starting, make sure you have the necessary elements at hand. To create your bracelet, you will need:

• Laine: Choose one or more colors you like; A single bracelet can request up to 10 meters of wire (according to its final length).
• Cardboard: This will be used to make a circular profession of weaving to facilitate wool braid.
• Scissors : To cut the wool and cardboard precisely.

Optional tools

Here are some additional tools that will help you get the best possible results:

• PIN: To keep the wool threads in place during the braid.
• Governed: To measure wool and cardboard cuts with precision.
• Crayon: To mark the places where you need to cut the cardboard.

Learn to create a two -colored Brazilian bracelet in a very simple way thanks to this tutorial, ideal for easily adding a touch of color and style to your outfit.

Step 1: Preparation of the equipment

The first step is to cut a circle in the cardboard, which will act as a company to be woven when preparing the bracelet. Use a rule to accurately measure the desired size.

The ideal size for this project has a diameter of about 10-12 cm. After cutting the circle, draw a small circle in the center (about 1 cm in diameter) and also cut it.

Cut the slots

Calculate how many wool threads will be used to create the bracelet, then divide this figure for two. Scores this division around the external edge of the circle. Each brand will correspond to the position of a crack.

Then take the scissors and carefully cut each crack up to about 1 cm deep. The cracks should be wide enough to comfortably accommodate the wool threads without deforming or giving in under the tension of the weaving.

Step 2: Wool installation and preparation

Choose the colors you want to use in your bracelet. For a balanced result, it is recommended to use identical multiples of the same number of colors. For example, if you have 8 cracks, you can use 2 sprigs of wool of each color and then create a two -colored bracelet.

Cut the threads to the desired length

It’s time to prepare wool threads to prepare the bracelet. Depending on the desired length, cut each wire with an appropriate length (about 10 m to start). Make sure all the wires have the same length to ensure a regular result of the bracelet.

You can follow the same process to design your single overhanging dream catcher.

Cardboard

Take a piece of each wool thread and make a knot together, leaving about 1 cm of free strap beyond the knot. Now insert the threads into the small circle of the center of the cardboard, so the knot is against the side of the box where you are going to work. Then it passes each wool thread through a corresponding crack around the external edge of the circle.

Step 3: braid

Now you are ready to start intertwined! In this example, we will use a technique called Star braid with eight branches. Here’s how to proceed:

1. Enter the wool wire located at the top of the circle and pull it down so that it is near the opposite thread.
2. Now he passes the second thread from the top to the right, placing him in the crack directly to the left of his partner.
3. Then insert the third thread (what is now above) and repeat the passages 1 and 2.
4. This sequence of movement continues around the circle, always in the same direction. You will quickly see a braid with eight ranch stars.

When you reached the desired length for the bracelet, gently remove the cracks from the cracks and tie a solid node to the free end. You can add some pearls or other additional accessories to further customize your creation. And here you are, you are beautiful Wool bracelet He is ready to be worn!